configure.sh
Steps Performed by configure.sh
Run configure.sh
to set up a MapR cluster node, or to set up a MapR
client node for communication with one or more clusters. You can also run
configure.sh to update the configuration of a node. For example, you can use configure.sh to
change the
services running on a node, specify a mySQL database for storing MapR Metrics data or specify the user that runs MapR services.configure.bat
. It requires the -c
parameter and does
not accept the -Z
parameter, but otherwise works in a similar way.
Each time
configure.sh
is run, it performs the following steps:
-
Updates /opt/mapr/conf/mapr-clusters.conf with the cluster name. It creates or
modifies a line in
/opt/mapr/conf/mapr-clusters.conf
containing a cluster name followed by a list of CLDB nodes. New entries are added to mapr-clusters.conf when the cluster name passed to the-N
parameter is different from the existing cluster name in that file. - Checks that the node has at least 4GB of RAM and that the /tmp and /opt partitions each have at least 1 GB of free space. If these conditions are not met, the script asks for confirmation before continuing.
- Disables standard NFS daemons. If the node has the mapr-nfs role, the script disables the standard Linux NFS daemon because both nfs processes cannot run on the same node.
-
Updates additional
*.conf
and*.xml
files related to the cluster and the services running on the node. For example,yarn-site.xml
,warden.conf
, andcldb.conf
may be updated based on input toconfigure.sh
. -
On the cluster nodes, it creates a group named shadow, adds the MapR user to this
group, and then enables members of the shadow group to view the
etc/shadow
file. The read-access to theetc/shadow
file enables MapR users to authenticate with the MapR cluster. - Starts newly installed services. As long as warden is running at the time you run configure.sh, new services are started.
-
All changes of configuration options or system files are logged to
/opt/mapr/logs/configure.log
. You can use the-L
parameter to specify a different log file name.
When you include disk setup options (-D or -F) on nodes with the mapr-fileserver role, the script also performs the following steps:
- Runs disksetup to create the disktab file. configure.sh takes the values you specify in the -disk-opts option and passes the value to disksetup. For example, if you include -disk-opts FW5 when you run configure.sh, configure.sh runs disksteup -F -W5
-
Starts Zookeeper and Warden. When the
configure.sh
script starts services, the message starting <servicename> is echoed to the standard output, to enable the user to see which services are starting. When Warden starts, Warden and ZooKeeper services are added to the inittab file as the first available inittab IDs, enabling these services to restart automatically upon failure.NOTE: You can specify the -no-autostart option to prevent the script from starting Zookeeper or Warden when you run configure.sh with the -F or -D options.
Syntax
You can use the following syntax in the /opt/mapr/server/configure.sh
file:
-C cldb_list (hostname[:port_no] [,hostname[:port_no]...])
-M cldb_mh_list (hostname[:port_no][,[hostname[:port_no]...])
-Z zookeeper_list (hostname[:port_no][,hostname[:port_no]...])
-D /dev/disks
-F /path/file.txt
[ -N cluster_name ]
[ -v ]
[-no-autostart] [ -disk-opts <options> ]
[ -on-prompt-cont [ y|n ] ]
[ -c ]
[ --isvm ]
[-HS <IP address>]
[ -J <CLDB JMX port> ]
[ -L <log file> ]
[ -M7 ][ -noDB ]
[ -N <cluster name> ]
[ -R ] [ --noRecalcMem ]
[-RM <IP address>]
[ -d <host>:<port> ]
[ -du <database username> ]
[ -dp <database password> ]
[ -ds <schema> ]
[ --create-user | -a ]
[ -U <user ID> ]
[ -u <username> ]
[ -G <group ID> ]
[ -g <group name> ]
[ -H <port_no> ]
[ -f ]
[ -syschk < y|n > ]
[ -genkeys ]
[ -certdomain <domain> ]
[ -nocerts ]
[ -S | -secure ]
[ -unsecure ]
[ -maprpam ]
[ -K | -kerberosEnable ]
[ -P "<cldbPrincipal>" ]
[ -no-auto-permission-update ]
[ -MF < Myriad framework name > ]
[ -MCL < Directory prefix name > ]
[ -MHA < y|n > ]
[ -defaultdb < maprdb|hbase > ]
Parameters
Parameter | Description |
---|---|
-C | Use the -C option only for CLDB servers that have a single IP address each.
This option takes a list of the CLDB nodes that this machine uses to connect to the
MapR cluster. The list is in the following format:
|
-M | Use the -M option only for multihomed CLDB servers that have more than one IP
address. This option takes a list of the multihomed CLDB nodes that this machine
uses to connect to the MapR cluster. The list is in the follwing format:
|
-Z | The -Z option is required unless -c (lowercase) or -R is specified. This option
takes a list of the ZooKeeper nodes in the cluster. The list is in the following
format:
|
-D disks | Specifies a comma-delimited list of disks and partitions to use with the MapR file system. With the -D option, you cannot specify partitions. By default, the configure.sh script automatically starts cluster services after configuration finishes successfully. If you do not want cluster services to be restarted, include the -no-autostart option along with the -D option. |
-F path to file | Specifies a path to a text file that specifies the disks and partitions to use with the MapR file system. By default, the configure.sh script automatically starts cluster services after configuration finishes successfully. If you do not want cluster services to be restarted, include the -no-autostart option along with the -F option. |
-v | In addition to logging information, also prints to
stdout . |
-no-autostart | Specifies that the script should not start Zookeeper or Warden when you run configure.sh. |
-disk-opts options | Enables you to specify a series of
disksetup
formatting options. Do not include spaces or commas between the disksetup
options. For example, you can specify -disk-opts FW5 to format the disks (F) and
configure 5 disks per storage pool (W5). |
-on-prompt-cont yn | Specify y to automatically respond Yes to all prompts. Specify
n to automatically respond No to all prompts. |
--isvm | Specifies virtual machine setup. Required when configure.sh on a cluster node that is on a virtual machine. This option configures the script to use less memory. |
-c | Specifies client setup. See Setting Up the Client. |
-J | Specifies the JMX port for the CLDB. Default: 7220 |
-H <port_no> | Specifies the HTTPS port number for connecting to the CLDB. The default port is 7443. |
-HS | Specifies the IP or hostname of the node in the cluster that has the
HistoryServer role. This is parameter is required when a node in the cluster
contains the HistoryServer role. In 5.1, this parameter is expanded to support the
Mesos DNS-style name with format for Job History. The format is
<myriad-fwk-name>.mesos. For example, if the -MF parameter is
myriadA, the name jobhistory.myriadA.mesos |
-L | Specifies a log file. If not specified, configure.sh logs errors to /opt/mapr/logs/configure.log . |
-M7 | Deprecated as of version 4.0.1. |
-noDB | Specifies that MapR-DB is not in use. |
-genkeys | Generates needed keys and certificates for the initial CLDB node in a secure cluster. |
-certdomain <domain> | Specifies a DNS domain for generated SSL wildcard certificates. This domain overrides the default DNS domain. |
-nocerts | When specified, the configure.sh script does not generate SSL
certificates even when the -genkeys option is specified. |
-S | -secure | Specifies that this cluster is a secure cluster. Cluster security is off by default. |
-unsecure | Specifies that this cluster is not secure. Default: non-secure. |
-maprpam | When specified, the configure.sh script installs MapR's version of Pluggable Authentication Modules (PAM). This option is ignored if -S is not set. |
-K | -kerberosEnable | Indicates that Kerberos security has been enabled. Kerberos security is disabled by default. |
-P "<cldbPrincipal>" | Specifies the Kerberos instance which is used to form a CLDB Kerberos principal in the form of mapr/<instance-name>@<realm-name>. Enclose this value in quotes ("). This value is ignored if Kerberos security is not enabled. |
-N |
Specifies the cluster name. If you do not specify a name, configure.sh applies a default name (my.cluster.com) to the cluster. Whenever you run configure.sh, you must be aware of the existing cluster name or names in mapr-clusters.conf and specify the -N parameter accordingly. If you specify a name that does not exist, a new line is created in mapr-clusters.conf and treated as a configuration for a separate cluster. Subsequent runs of configure.sh without the -N parameter will operate on this default cluster. If you specify a name when you first run configure.sh, you can modify the CLDB and ZooKeeper settings corresponding to the named cluster by specifying the same name and running configure.sh again. Whenever you need to re-run configure.sh on a given cluster (to add or rename nodes, for example), be sure to specify the same cluster name that you used when you ran configure.sh for the first time. |
-R | After initial node configuration, specifies that configure.sh should use the previously configured ZooKeeper and CLDB nodes. The -C and -Z parameters are not required when -R is specified. When -R is specified, the CLDB credentials are read from mapr-clusters.conf and the ZooKeeper credentials are read from warden.conf. Use the -R option when you make changes to the services configured on a node without changing the CLDB and ZooKeeper nodes. |
-R --noRecalcMem | Skips recalculating memory settings when refreshing roles. Used only with the -R parameter. |
-RM |
In 5.1, this parameter is expanded to support the Mesos DNS-style hostname for Myriad configuration. The Mesos-style hostname is <application name>.marathon.mesos. When starting ResourceManager from Marathon, the <application name> rm, for example, rm.marathon.mesos. In 4.0.2, this parameter is not required unless you want to configure manual or automatic failover; zero configuration failover is enabled by default. In 4.0.1, this parameter specifies the nodes in the cluster with the ResourceManager role. List the nodes in the following format: For more information, see ResourceManager High Availability. |
-d | The host and port of the MySQL database to use for storing MapR Metrics data. |
-du | The username for logging into the MySQL database used for storing MapR Metrics data. |
-dp | The password for logging into the MySQL database used for storing MapR Metrics data. |
-ds <schema> | Name of the database schema to use for the MySQL database used for storing MapR Metrics data. The default schema name is metrics. |
-defaultdb | Sets the default database (HBase or MapR-DB) that HBase clients connect to. If you do not explicitly configure this option, it defaults to HBase when you have mapr-hbase-regionserver or mapr-hbase-master installed on the cluster; otherwise, it defaults to MapR-DB. You can also change the database setting using hbase-site.xml or the HBase job configuration. This setting is ignored for HBase 0.98.12 client connections. For more information, see Configure the Default Database for HBase Clients |
--create-user or -a | Create a local user to run MapR services, using the specified user from -u or the environment variable $MAPR_USER. |
-U | The user ID to use when creating $MAPR_USER with the --create-user or -a option; corresponds to the -u or --uid option of the useradd command in Linux. |
-u | The user name under which MapR services will run. |
-G | The group ID to use when creating $MAPR_USER with the -create-user or -a option; corresponds to the -g or -gid option of the useradd command in Linux. |
-g | The group name under which MapR services will run. |
-f | Specifies that the node should be configured without the system prerequisite check. |
-syschk | configures the system checks to be enabled or disabled. Value: Y/N |
-no-auto-permission-update | Pass this option to prevent MapR from silently altering permissions in
/etc/shadow . |
-MF | Name of the Myriad framework which is displayed in the Mesos UI. |
-MCL | Top-level directory where all the staging data as well as shuffle data is written for a specific Myriad framework. Used when multiple clusters are implementing Myriad. |
-MHA | Enables Myriad high availability. |
Examples
Add a node (not CLDB or ZooKeeper) to a cluster that is running the CLDB and ZooKeeper on three nodes:On the new node, run the following command:
/opt/mapr/server/configure.sh -C nodeA,nodeB,nodeC -Z nodeA,nodeB,nodeC
Configure a client to work with cluster my.cluster.com, which has one CLDB at nodeA:
On a Linux client, run the following command:
/opt/mapr/server/configure.sh -N my.cluster.com -c -C nodeA
On a Windows 7 client, run the following command:
C:\opt\mapr\server\configure.bat -N my.cluster.com -c -C nodeA
Add a second cluster to the configuration:
On a node in the second cluster your.cluster.com, run the following command:
configure.sh -C nodeZ -N your.cluster.com -Z <zkNodeA,zkNodeB,zkNodeC>
Adding CLDB servers with multiple IP addresses to a cluster: In this example, the cluster my.cluster.com has CLDB servers at nodeA, nodeB, nodeC, and nodeD. The CLDB servers nodeB and nodeD have two NICs each at eth0 and eth1.
On a node in the cluster my.cluster.com, run the following command:
configure.sh -N my.cluster.com -C nodeAeth0,nodeCeth0 -M nodeBeth0,nodeBeth1 -M
nodeDeth0,nodeDeth1 -Z zknodeA
In this example, the cluster my.cluster.com has two CLDB servers at nodeA and nodeB. The ZooKeeper node for this cluster is at nodeC. To start the cluster in secure mode, run the following command on nodeA::
configure.sh -N my.cluster.com –C nodeA,nodeB –Z nodeC –secure –genkeys –F
<disklist file>
This command creates the ssl_truststore
,
ssl_keystore
, maprserverticket
, and
cldb.key
files. Copy those files from nodeA's
/opt/mapr/conf
directory to nodeB's /opt/mapr/conf
directory.
On nodeB, change the permissions on these files to the mapr user with the following command:
chown 600 ssl_truststore ssl_keystore maprserverticket cldb.key
On nodeB, run the following command:
configure.sh –N mycluster.com –C nodeA,nodeB –Z nodeC –secure –F <disklist
file>